1·Be careful not to damage the sealing gasket.
小心，不要损坏密封垫片。
2·IP65 when properly installed using the sealing gasket supplied.
符合IP65当正确安装使用的密封垫片供应。
3·Plate heat exchanger of sealing gasket slip off the gasket groove.
板式换热器的密封垫片滑离了垫片槽。
4·The primary function of sealing gasket is to prevent gas from leakage.
密封垫圈的主要作用是防止气体泄漏。
5·IP65 when properly installed using the sealing gasket supplied (without bezel).
符合IP65当正确安装使用的密封垫圈供应(不含面板)。
6·Static centrifugal sealing gasket is the basic elent, the use of a very wide-ranging.
垫片是 离心泵静弥缝的基本元件，施用规模很是广泛。
7·The design defect was found on the fixed sealing gasket in the guide valve of the operating mechanism.
经故障分析，并在制造厂家指导下解体检查发现该操动机构分合闸导向阀的固定密封垫存在设计上的缺陷。
8·It can be installed in horizontal or vertical. Sealing gasket must be put on the connected, then equably tight the bolt.
本阀可水平安装或垂直安装，安装时两法兰连接中间必须加密封垫片，然后锁紧螺栓。
9·Installation should be based on the shape of the connection of different sections and sizes of sealing gasket, and placed correctly.
安装应根据连接处形状选用不同截面和尺寸的密封垫，并安放正确。
10·The pressure of ascension in oil from sealing gasket place, or leakage of oil consumption and cause additional engine leakage faults.
该压力的提升导致机油从密封圈或密封垫处渗漏，造成额外的机油消耗和发动机泄漏等故障。